Interface DALI 0-10V PWM

DALI 0-10V PWM interface

Interface for integrating luminaires with 0-10V control input into a DALI system

The InterfaceDALI 0-10V PWM 86458508-PWM converts DALI signals into a PWM output signal and enables the integration of ECGs or LED ballasts with PWM or 0-10V input into a DALI system. The output can drive up to 1mA.

You can get the following versions:
Conversion of a DALI signal into a galvanically isolated PWM signal (up to 1mA output current): 86458508-PWM Interface DALI 0-10V PWM
Converting a DALI signal into a galvanically isolated PWM signal (up to 100mA output current): 86458508-100 DALI PWM
Converting a DALI signal into a 0-10V analog signal without galvanic isolation: 86458508-LE Schnittstelle DALI 0-10V
Converting a DALI signal into a 0-10V analog signal with galvanic isolation: 86458508-AN Schnittstelle DALI 0-10V

Product features

• Module for converting a DALI signal into a PWM output signal
• Suitable for controlling electronic ECGs with 0-10V control input, provided they have an appropriate input filter (e.g. from Meanwell, LG or Philips).
• Conversion of the DALI 8-bit ArcPower level into a corresponding PWM signal (~500Hz) of 0%-100%.
• Two variants of control characteristic available
• Two variants of control characteristic available
• Current at PWM output: 1mA max. (current sink)
• The module is supplied directly via the DALI line and does not need to be connected to the mains
• The interface represents a device on the bus and can be addressed accordingly
• Connection terminals for looping through the DALI bus
• Galvanic isolation between DALI and PWM output signal

 

Technical Data

• Supply: from DALI bus
• power supply: from DALI bus
• type. Power consumption* DALI: 3.1 mA
• Inputs: DALI
• Output: 488Hz PWM (0-100%) /1mA current sink
• Dimensions (L x W x H): 42 mm x 28 mm x 14 mm
• Weight: ~10g
• Temperature: 0 °C - 45 °C
• Protection class: IP20 connection wires
• Cross section: 0.5 - 1.5 mm²

*At typ. Supply voltage (16VDC), without communication